Honda Prelude Water Vapor Jet


Part Number	Description	R.R.P
INVO-WVP	WATER VAPOR JET Universal fitment for any vehicle with Electronic fuel injection system with fuel regulator and controlled by ECU engine Management. Can be reused on other cars.	280

Honda Prelude 2.2 DOHC VTEC These photos show the installation of our vapor jet onto a Honda Prelude 2.2 DOHC VTEC. 1 ) mount the bottle bracket securely; 2 ) fit the bottle into the bracket and then top up the bottle with water. 3 ) connect the hose from the bottle to "T junction" 4 ) as you can see from the photos, the hose from the vapor jet is connected with a "T junction" where one end is connected to the fuel regulator and the other end is connected to the inlet manifold where the air sucks in NOT out. Our Vapor Jet is currently reviewed by Max Power in May 2001 issue under "Fresh Stuff." RRP : GBP 280



Honda Prelude 2.2 DOHC VTEC One of agents RRR Motor Sports has fitted our Invo Water Vapour Jet and a Turbo Air Jet into a Ice Man Induction Kit that was supplied by RRR Motor Sport. The air jet unit is to give more cold air to the engine via the inlet manifold. Dave and Tanya noticed a much more responsive mid-range from the car when the VTEC kicks in. If you would like to speak to Tanya direct regarding the performance of the air jet and vapour jet, you contact them on 07904 366760. Alternatively, contact RRR Motor Sport who supplied the product to them on 01522 531735. Ask for Adrian or James regarding Invo products.



		This is the new Honda Prelude 2.0. Supplied and fitted by Motor-Tech in Birmingham. You can call them on 0121 3590000 regarding our Water Vapor Jet. Or speak to Frankie on 07876 473286.