Honda Integra Water Vapor Jet

INVO-WVP

WATER VAPOR JET

Universal fitment for any vehicle with Electronic fuel injection system with fuel regulator and controlled by ECU engine Management. Can be reused on other cars.

280

Honda  Integra Type R
This vehicle is fitted with our INVO 2-piece induction kit and our water vapor jet.
Here is the instruction on installing our Vapor Jet :
1) mount the bottle bracket securely;
2 ) fit the bottle into the bracket and then top up the bottle with water.
3 ) connect the hose from the bottle to "T junction"
4 ) as you can see from the photos, the hose from the vapor jet is connected with a "T junction" where one end is connected to the fuel regulator and the other end is connected to the inlet manifold where the air sucks in NOT out.

Our Vapor Jet is currently reviewed by Max Power in May 2001 issue under "Fresh Stuff."

RRP: GBP 280.00

One of our agents R.K Tuning supplied and fitted our Invo Induction Kit with a Heat Shield Air Fitted and Invo Water Vapour Jet onto a Honda Integra Type R. After the installation, the customer found his car mid-range much more responsive and he also noticed it gained more mileage from a full tank. He was very surprised.

If you would like to speak directly to Ron at R.K Tuning, he can be contacted on 0208 3484218, based in North London, Highgate.

Our agents Streetworkz supplied and fitted our Water Vapor Jet. You can contact Streetworkz on 0800 9530207 and ask for James or Brian (07736-283381). Integra Type R 97-2001 click for larger picture of pic4, pic6. We also fitter a chrome induction tube to a Piper Cross Air filter.

Invouauto Supplied the Water Vapour Jet and P&C 4-2-1 lightweight, one piece header weighing 6kg to John Blakeman and Chris who are members of the Honda Revolution Club and are on the committee. The header will change colour (purple/ blue) while driving due to the heat. Also fitted was our Titanium Generation 3 Limited Edition Exhaust . Click for larger picture of pic2.

You can contact the owner (John) of this Integra on mobile: 07929 948137, office: 01922 453876. Torque Automotive engineering. Archers, Alrewas Road, Kings Bromley Staffordshire. DE13 7HW. Email: jon@hondarevolutions.com .

One of our agents R.K Tuning supplied and fitted our NEW AIS4-I940G/CH Invo Induction Kit with a Heat Shield Air filter Fitted and Invo Water Vapour Jet onto a Honda Integra Type R. After the installation, the customer found his car mid-range much more responsive and he also noticed it gained more mileage from a full tank. He was very surprised.

If you would like to speak directly to Ron at R.K Tuning, he can be contacted on 0208 3484218, based in North London, Highgate.

Click for larger pictures of pic 2 and 4.

Copyright © Invoauto 2002